Table of Contents
Advertisement
AM antenna
1
ANTENNA
[
]
AM
FM 75
AM loop antenna
(supplied)
1
Press and hold the clamp of the AM
terminals on the rear of the unit.
2
Insert the end of the AM loop antenna cord
into the terminal.
3
Release the finger from the clamp.
4
Turn the AM loop antenna until you have the
best reception.
To connect an outdoor AM antenna
When reception is poor, connect a single vinyl-covered wire
to the AM terminal and extend it horizontally. (The AM loop
antenna must remain connected.)
For better reception of both FM and AM
• Make sure the antenna conductors do not touch any other
terminals and connecting cords.
• Keep the antennas away from metallic parts of the unit,
connecting cords, and the AC power cord.
2
Vinyl-covered wire
(not supplied)
Connecting Speakers
1
Speaker cord
(blue/black)
MAIN SPEAKER
L
R
Blue
Speaker cord
(blue/black)
From right
main
speaker's
terminals
From left
main
speaker's
terminals
1
Press and hold the clamp of the speaker
terminal on the rear of the unit.
2
Insert the end of the speaker cord into the
terminal.
Match the polarity (colors): Blue (+) to blue (+) and black
(–) to black (–); Red (+) to red (+) and black (–) to black
(–).
3
Release the finger from the clamp.
IMPORTANT: Use only speakers with the same speaker
impedance as indicated by the speaker terminals on the
rear of the unit.
– 7 –
2
Black
SUBWOOFER
[
]
[
]
4-8
6-16
L
R
Red
Black
Speaker cord
(red/black)
From right
subwoofer's
terminals
subwoofer's
Speaker
cord
(red/black)
From left
terminals
Hide quick links:
Advertisement
Table of Contents
