Network Parameters - IQ CCTV HD 960H User Manual

IQCCTV IQ960DVR User Manual
Main Stream: For detailed settings, please refer to DVR local setting (shown as Picture 6-16).
This option allows the user to modify the resolution, frame rate, Bit rate and audio of the record
channel.
6.3.3.3

Network Parameters

Unfold the <Network> option to enter into the sub-options: Network, sub stream, Email, mobile
and DDNS configuration.
The IQR960D range supports three network types, including Static, DHCP and PPPoE. The
System default sets <Static> as its network type. The user can allocate IP addresses and
perform Port forwarding. If the user sets the <UPNP> to "On", there is no need to perform port
forwarding. When the network parameters have been modified successfully, the DVR will
automatically restart.
For details on how to set parameters please refer to below Picture 6-18, Picture 6-19 and Picture
6-20.
Picture 6-18
55