Draytek Vigor2860 series User Manual page 410

Available settings are explained as follows:
Item
Enable Application
Server
Application Name
Application
IP Address
Port
Idle Timeout
Scaling
Screen Size
Samba Path
3. Enter the required information.
4. After finished the above settings, click OK to save the configuration.
Vigor2860 Series User's Guide
Description
Check the box to enable such profile.
Type a name for such application. The length of the name is
limited to 23 characters.
There are three types offered for you to create an
application profile.
Virtual Network Computing (VNC) – It allows you to
access and control a remote PC through VNC protocol.
Remote Desktop Protocol (RDP) – It allows you to access
and control a remote PC through RDP protocol.
Samba Application – It allows you to access and control a
remote PC through Samba service.
If you choose VNC or RDP, you have to type the IP address
for this protocol.
If you choose VNC or RDP, you have to specify the port
used for this protocol. The default setting is 5900.
If you choose VNC, you have to specify the time for
disconnecting the SSL VPN tunnel.
If you choose VNC, you have to choose the percentage
(100%, 80%, 60%) for such application.
If you choose RDP, you have to choose the screen size for
such application.
If you choose Samba, you have to specify the path of the
Samba service.
396