Led Indicators And Connectors; For Vigor2860 - Draytek Vigor2860 series User Manual

1 . 2 L E D I n d i c
1 . 2 L E D I n d i c
Before you use the Vigor router, please get acquainted with the LED indicators and connectors
first.
1 . 2 . 1 F o r V i g o
1 . 2 . 1 F o r V i g o
LED
ACT (Activity)
USB1~2
WAN2
DSL
VPN
QoS
WCF
DoS
LED on Connector
WAN2
(Giga)
GigaLAN
1~6
a t o r s a n d C o n
a t o r s a n d C o n
r 2 8 6 0
r 2 8 6 0
Status
Blinking
Off
On
Blinking
On
Off
Blinking
On
Blinking
On
On
On
On
Blinking
Left On
LED
Off
Blinking
Right On
LED
Off
Left On
LED
Off
Blinking
Right On
LED
Off
n e c t o r s
n e c t o r s
Explanation
The router is powered on and running normally.
The router is powered off.
USB device is connected and ready for use.
The data is transmitting.
Internet connection is ready.
Internet connection is not ready.
The data is transmitting.
The router is ready to access Internet through DSL link.
Slowly: The DSL connection is ready.
Quickly: The connection is training.
The VPN tunnel is active.
The QoS function is active.
The Web Content Filter is active. (It is enabled from
Firewall >> General Setup).
The DoS function is active.
It will blink while detecting an attack.
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps
The port is connected.
The port is disconnected.
The data is transmitting.
The port is connected with 1000Mbps.
The port is connected with 10/100Mbps
3
Vigor2860 Series User's Guide