Subaru 2014 Legacy/Outback Owner's Manual page 261

4
Touch Add New (Add New).
5
Operate the portable device to enter the passcode
(passkey) of the unit.
• The name of the unit is CAR MULTIMEDIA.
• The initial setting for the passcode (passkey) is 0000.
• Operate the portable device while the Registered Devices
screen is displayed.
<Registered Devices screen>
6
When the registration is complete, "Connection
completed." appears.
• The portable device registration is complete.
• After the registration completed message is displayed,
"Connection successfully established." appears.
NOTE
• If the registration fails, "Connection failed." appears on the screen. If this
happens, perform the registration operation again.
• For details of operations on the portable device, see the portable device's
instruction manual.
■
Deleting a portable device registration
You can delete portable devices that are registered on the unit.
1
Press .
• If the Audio operations screen or Multi screen is displayed, you
can also display the Setup screen by touching
If Setup (Setup) is not displayed, touch
How to Operate Portable Audio Devices
(Setup).
Setup
.
Audio and Visual 259