Subaru 2014 Legacy/Outback Owner's Manual page 197

Adjusting the audio balance
You can adjust the sound balance from front to rear and left to right.
1
On the Sound Settings screen, touch
Sound Position.
• When your vehicle is equipped with harman/kardon amplifiers,
touch Adjust (Adjust) and then start operation from step 3.
2
Touch (Fader/Balance).
Fader/Balance
3
Touch the balance point that you want to use.
<Operations screen for vehicles equipped with harman/kardon amplifiers>
(Adjust) in
Adjust
NOTE
You cannot set the volume balance at the same time as positioning selector
adjustments. (Only for vehicles NOT equipped with harman/kardon amplifiers)
<Operations screen for vehicles NOT equipped with harman/kardon amplifiers>
• To fine adjust, touch any of the balance adjusting buttons
, , or to change the value by 1 step.
When you touch and hold one of the balance adjusting buttons
, , or , the value changes continuously
but stops at the center value. To continue to change the
balance, touch one of the balance adjusting buttons again.
• You can also adjust to the desired balance by touching the
screen.
• Touch Center (Center) to cancel the Fader/Balance setting and
return to the center value.
• Touch Position (Position) to return to the previous screen.
(Only for vehicles NOT equipped with harman/kardon amplifiers)
• After completing the adjustment, touch
adjusted settings and return to the Sound Settings screen.
Basic Operation
to save the
Audio and Visual 195