Subaru 2014 Legacy/Outback Owner's Manual page 25

NOTE
Bluetooth :
Perform the Bluetooth settings. (See Page 23.)
Settings (Settings):
Perform the unit settings. (See Page 24
Software Version (Software Version):
View information such as the map data that is stored on the unit or version
information for the audio application. (See Page 35.)
DivX(R) VOD (DivX(R) VOD):
Display DivX VOD code. (See Page 245.)
System Check (System Check):
Check the sensitivity of the GPS signal reception, or the connection of the
parking and reverse signals. (See Page 172.)
Language
(Language):
Perform the language setting (See Page 34.)
SD Eject
(SD Eject):
Touch to remove the map SD card or the SD memory card that contains the
picture data. (See Page 15.)
- 33.)
■
Bluetooth setting
Touch Bluetooth to perform the various Bluetooth settings.
1
On the Setup screen, touch
2
Touch the button that you want to set.
• Touch to return to the previous screen.
• Registered Devices (Registered Devices):
Register or delete a Bluetooth device, or display information for
connected devices. (See pages 41, 258.)
(Connect Phone):
Connect Phone
Register a cell phone or perform the connection settings. (See
Page 43.)
Connect Audio Device (Connect Audio Device):
Register a Bluetooth audio device or perform the connection
settings. (See Page 260.)
Detailed Bluetooth Settings
Display or set the detailed Bluetooth information for this unit.
(See Page 63.)
(Passcode Settings):
Passcode Settings
Set the passcode (passkey). (See Page 64.)
Before Use
.
Bluetooth
(Detailed Bluetooth Settings):
Introduction 23