Configuration Of Lan Settings - Iridium Pilot TPIM1301 Installation Manual

Land station
Table of Contents

Advertisement

Figure 17.
Status Page
The status page provides the condition of the Iridium Pilot Land Station hardware and software:
• The status of the LEDs located on the IDU is provided
• Signal strength of the current satellite down-link is displayed
• Status of the SIM card indicates if it is installed and operational
• GPS status and location are displayed
• Satellite connection status shows current connection along with historical statistics
• Voice line data displays line type, phone number and voice mail service

11. Configuration of LAN Settings

The Iridium Pilot Land Station IBSU allows you to configure the following LAN settings, via the web pages
when logged on as 'admin' . These settings include:
• IP Address
• Subnet Mask
• DHCP Server and IP Address Range to Use
• DNS Forwarding
IP Address
This is the IP address of the IBSU as seen at the location. The factory default is 192.168.0.1. You should not
change this default unless there is already LAN equipment at the location, in which case you must set this to
an unused IP address of the LAN.
26
Iridium Pilot Land Station Installation Guide

Advertisement

Table of Contents
loading

Table of Contents