Changing The Picture Tone-Vfp (Video Fine Processor) - JVC LVT1348-003A Instructions Manual

Changing the Picture Tone—VFP (Video
Fine Processor) Remote
ONLY
While showing a playback picture on the TV screen, you can
select the preset picture tone, or adjust it and store your own
preferences.
To select a preset picture tone
1
Activate VFP.
2
Select a preset picture tone.
NORMAL
Normally select this.
CINEMA Suitable for a movie source.
USER1/USER2 You can adjust parameters and can
store the settings (see the right
column).
18
NORMAL
0
GAMMA
0
BRIGHTNESS
CONTRAST 0
0
SATURATION
TINT 0
SHARPNESS 0
On the TV screen
To adjust the picture tone
1
Select "USER1" or "USER2."
• Follow steps 1 and 2 explained on the left column.
2
Select a parameter you want to adjust.
GAMMA Adjust if the neutral color is bright or
dark (–3 to +3).
BRIGHTNESS Adjust if the entire picture is bright or
dark (–8 to +8).
CONTRAST Adjust if the far and near positions
are unnatural (–7 to +7).
SATURATION Adjust if the picture is whitish or
blackish (–7 to +7).
TINT Adjust if the human skin color is
unnatural (–7 to +7).
SHARPNESS Adjust if the picture is indistinct
(–8 to +8).
3
Adjust the parameter.
4
Repeat steps 2 to 3 to adjust other parameters.
To erase the screen, press VFP again.