Blue Line Innovations PowerCost Monitor User Manual page 27

7. Press or
8. Press SET
9. Press OR Press-
and-Hold or
10. Press SET
11. Press or
12. Press SET
13. Press
14. Press SET
Set the correct day of the week.
Select the correct Day-of-Week segment.
Your Day-of-Week segment is stored and
the currently stored Kh value flashes.
Set your meter's Kh Factor.
Each button press increases or decreases
the Kh value by 0.1. Press-and-hold to
change the value by increments of 1.0.
If you have an electromechanical meter, enter 7.2.
If you have an electronic meter, enter 1.0.
Your Kh value is stored."1" is displayed
under RATE, and the currently stored value
for Rate 1 flashes next to the ¢/kWh segment.
Set your electricity rate
Each button press increases or decreases
the displayed Rate value by 0.1.
Your Rate is stored. The THRESHOLD
segment appears and the currently stored
Threshold flashes.
Set the THRESHOLD to "0"
Your electricity rate is now stored.
The Display Unit quits Configuration
mode and is now fully configured
for operation.
25