Blue Line Innovations PowerCost Monitor User Manual page 25

ICON/BUTTON
CLEAR
SYNC
SET
MODE
12/24
ºC/ºF
Light
PURPOSE
Increase: During setup, each press of the button
INCREASES the target value on the display by various
increments. In some cases, if you Press-and Hold, the value
is increased by a much larger increment; for example, the
Kh increases by increments of 1.0 instead of 0.1.
Decrease: During setup, DECREASES the target value
on the display by various increments. In some cases, if
you Press-and Hold, the value decreases by a much larger
increment; for example, the Kh value decreases by
increments of 1.0 instead of 0.1.
Press and hold to reset the consumption totals to zero.
Press and hold to enter ID mode.
Press and hold to enter configuration mode.
In Configuration Mode, press and hold to switch between
Tiered-Rate and Time-of-Use operating modes.
Time Format: Press to switch the clock between 12-hour
and 24-hour time display format.
Temperature Format: Press to switch between Celsius and
Fahrenheit degrees temperature display format.
Backlight: Press to illuminate the display backlight for
5 seconds.
23