Gigabyte GA-M61PME-S2 User Manual page 36

HDD S.M.A.R.T. Capability
Enables or disables the S.M.A.R.T. (Self Monitoring and Reporting Technology) capability of your
hard drive. This feature allows your system to report read/write errors of the hard drive and to
issue warnings when a third party hardware monitor utility is installed. (Default: Disabled)
Away Mode
Enables or disables Away Mode in Windows XP Media Center operating system. Away Mode
allows the system to silently perform unattended tasks while in a low-power mode that appears off
(Default: Disabled)
Init Display First
Specifies the first initiation of the monitor display from the installed PCI graphics card, PCI Express
graphics card, or the onboard VGA.
Frame Buffer Size
Frame buffer size is the total amount of system memory allocated solely for the onboard graphics
controller. MS-DOS, for example, will use only this memory for display. Options are: 32M, 64M
(default), 128M, 256M, Disabled.
Onboard GPU
Enables or disables the onboard VGA function.
Activates the onboard VGA only if no PCI Express VGA card is installed. (Default)
Always activates the onboard VGA, whether or not a PCI Express card is installed. If you wish to
set up a dual view configuration, set this item to Always Enable.
GA-M61PME-S2 Motherboard
Downloaded from www.Manualslib.com
PCI Slot Sets the PCI graphics card as the first display.
Onboard VGA Sets the onboard VGA as the first display.
PEG Sets PCI Express graphics card as the first display. (Default)
Enable If No Ext PEG
Always Enable
manuals search engine
- 36 -