Playing At Random-Random Play - JVC HX-Z30 Instructions Manual

To check the program contents
On the remote control ONLY:
Before playing, you can check the
program contents by pressing
¢ (¡) or 4 (1).
• ¢ (¡) : Shows them in the
programed order.
• 4 (1) : Shows the programed tracks in the reverse
order.
To modify the program
To erase the last programed tracks, press
CANCEL/DEMO (or press PROGRAM
CANCEL on the remote control).
• Each time you press the button, the last
programed track is erased from the
program.
To add tracks into the program before playing, simply
select the track numbers you want to add by following step 4
of the programming procedure. If you want to add tracks
from another disc, follow steps 3 and 4 .
To erase the entire program before or after playing, press
7 until "CD PROGRAM" appears on the display.
• The program you have made will be erased:
– when you unplug the AC power cord, or
– when a power failure occurs.
Playing at Random—Random Play
The tracks of all the loaded discs will be played at random.
• To use Repeat Play (see page 19) for Random Play, press
REPEAT after starting Random Play. Only REPEAT 1 and
REPEAT ALL can be selected for Random Play.
1
Load a disc.
2
Press the corresponding disc number button
(CD1 – CD5) where a disc is loaded in step 1 ,
then press 7.
CANCEL
/DEMO
CD1
3 CD
CD
PROGRAM
PROGRAM CANCEL
REC
TAPE
M
START/STOP
3
Activate Random Play.
On the unit:
Press CD PLAY MODE repeatedly
until "CD RANDOM" appears on
the display.
• Each time you press the button, the play mode changes
as follows:
On the remote control:
Press RANDOM so that "CD
RANDOM" appears on the
display.
• The RANDOM indicator also lights up on the display.
4
Press CD 3¥8.
The tracks are played randomly.
Random Play ends when all the tracks of the all loaded
discs are played once.
To skip the currently playing track, turn 4 / ¢ to the
right (or press ¢ (¡) on the remote control).
If you turn 4 / ¢ to the left (or press 4 (1) on
the remote control)
You cannot go back to the previous tracks during Random Play.
To stop playing, press 7.
To exit from Random Play, press CD PLAY MODE
repeatedly until the RANDOM indicator goes off (or press
RANDOM on the remote control) after playback stops.
CD2 CD3 CD4
CD PROGRAM CD RANDOM
Total track number and
total playing time (Continuous Play)
Continued
CD5
/BEEP
CD PLAY MODE
4 5
CD CD
PRO
R
REPEAT RANDOM STAR
SOUND
SOUND
MODE
TURBO
CD
18