Playing Back A Tape - JVC HX-GD8 Instructions Manual

Playing Back a Tape

To insert a tape
You can play back type I tapes.
• The use of C-120 or longer tape is not recommended.
To start:
REV.MODE
To rewind tape:
Before or after play...
Rewinds the tape to the right.
Rewinds the tape to the left.
• You can also use 4/¢ buttons on the remote control.
To change the tape running direction
REV.MODE
14
Push
Insert
Close
To stop:
3 (forward)
2 (reverse)
To reverse the tape automatically
REV.MODE
(holding then...)
• You can also use REVERSE MODE button on the unit.
Tape is automatically reversed, and playback
repeats until you stop it.
Tape will not be reversed. When the current
side of the tape reaches its end, playback stops.
To locate the beginning or next of a recording—
Music Scan
During play, designate where the recording you want is
located—specify how many recordings need to be skipped
on the tape.
Searches for the beginning of the
recording to the right.
Searches for the beginning of the
recording to the left.
• You can also use 4/¢ buttons on the remote control.