Charge The Handset Battery; Language; Check For Dial Tone; Set The Dial Mode - Ativa A241 User Manual

Installation

Charge the handset battery

Place the handset in the base . CHARGING... will display . Be sure to charge the battery for at least 16
hours before using your phone .

Language

• Press PROG, then press
• The current setting blinks . Press
• Press SELECT to save your selection .

Check for Dial Tone

After the batteries are charged, pick up the handset and press TALK; you should hear a dial tone . If you
do not, try this phone in another phone jack .

Set the Dial Mode

If you have touch tone service, the phone is ready to use as soon as the battery is charged . If you have
pulse (rotary) service, you'll need to change the dial mode .
• Press PROG.
• Press or until the screen displays DIAL MODE: and the current setting .
• Press SELECT. The current setting blinks .
• Press or to select TONE or PULSE.
• Press SELECT to save .

Set Handset Date and Time

If you subscribe to caller ID service, the date and time will be set automatically with the first incoming
call . If you do not have caller ID service, you can set the date and time manually:
• Press PROG, then press
• The month is flashing. Press
Press SELECT .
until LANGUAGE is displayed . Press SELECT.
or
or until the screen displays the correct language .
until DATE/TIME is displayed . Press SELECT.
or
or until the screen displays the correct month .
www.officedepot.com
• If the phone will
not be used for a
long period of time,
remove the battery
to prevent possible
leakage .
• If you have any
trouble installing
your phone,
please refer to the
Troubleshooting
section near the
end of this manual .