Table of Contents
Advertisement
Option Installation
STEP 2:
STEP 3:
STEP 4:
3-18
Option Installation
See Figure 3-10, on the previous page, to locate the
Framestore sub-board (J7 and surrounding shaded area).
Note the orientation notch in J7 and orient the Framestore
sub-board to match. Seat the sub-board on the connector and
press gently but firmly directly over the connector area so as
not to unduly flex the Switcher board. Fix the standoff
fastening screws to secure the sub-board. Use the Accom
supplied tool to reseat the Switcher board in the 8150 Signal
Chassis.
Power up the Signal Chassis. Select Framestore 1 as the source
for the program or preview outputs, and select a video source
as the input to Framestore 1. See the Operations Manual for
more information. Verify that you can freeze the selected
video in Framestore 1.
Repeat the above step for Framestore 2.
8150 Technical Guide
9100-0212-04 - May 2000
Advertisement
Table of Contents
