Table of Contents
Advertisement
8150 Technical Guide
STEP 2:
STEP 3:
STEP 4:
9100-0212-04 - May 2000
Press the Save Recall softkey to bring up the Save Recall
submenu. Press the Save softkey on the left side of the
display.
If the external floppy disk drive is connected or the hard disk
drive is installed, use the Drive softkey to the select the drive
to which you want to save the file(s).
Use the File Type pushknob to select the type of file you want
to save. These are the file types available:
EFF – Effect file. Use the Register Number pushknob to select
the effect register (0 - 24) that you want to save to disk.
TIM – Timeline file. Use the Register Number pushknob to
select the Timeline effect number (0 - 99) that you want to save
to disk.
WIP – User Wipe file; use the Register Number pushknob to
select the User Wipe register (1 - 20) that you want to save to
disk.
CCR – User Color Corrector file; use the Register Number
pushknob to select the User Color Corrector register (1 - 20)
that you want to save to disk.
PER – Personality menu settings file.
ENG – Engineering menu settings file.
TIF – Compressed computer image file. Use the Register
Number pushknob to select which Framestore video (1 or 2)
you want to save to disk.
YUV – Full frame 8-bit uncompressed image file; use the
Register Number pushknob to select which Framestore
video (1 or 2) you want to save to disk.
Y10 – Full frame 10-bit uncompressed image file; use the
Register Number pushknob to select which Framestore
video (1 or 2) you want to save to disk.
KEY – User Key file; use the Register Number pushknob to
select the User Key register (1 - 20) that you want to save to
disk.
MAT – User SuperMatte file; use the Register Number
pushknob to select the User SuperMatte register (1 - 20) that
you want to save to disk.
Disk Drive Operations
Engineering Setup
5-49
Advertisement
Table of Contents
