Table of Contents
Advertisement
Signal Chassis
There are four Interpolator Coefficient #2 SIMMs. They are identical, and
support a video or key component path.
There are eight Transform Framestore SIMMs. They are identical, and
are divided into four banks. Each provides a fieldstore function.
There are four jumpers on the DVE board. Their positions are factory set
and should not be changed for normal operations.
4-14
System Overview
SM8B4 A channel Y interpolator
SM8B3 A channel C interpolator
SM8B2 B channel Key/Y interpolator
SM8B1 B channel Shadow/C interpolator
Field A SM7A2 and SM7A1
Field B SM6A3 and SM6A2
Field C SM6A1 and SM5A2
Field D SM5A1 and SM4A1
JP8F1
Jumper across pins 1 and 2 for normal operation. The 2 to 3 setting is
for factory use only.
JP8E1
Jumper across pins 5 to 6 and 7 to 8 for normal operation. The other
settings are for factory use only.
JP8E2
Leave all positions open. This is a debug port for factory use only.
JP8E3
Leave all positions open. This is for factory use only.
8150 Technical Guide
9100-0212-04 - May 2000
Advertisement
Table of Contents
