Step 3: Hook Up - JVC GVT0125-003A Instructions Manual

Step : Hook Up
3
If you need more detailed information, see page 6.
Turn the power off to all components before connections.
Illustrations of the input/output terminals below are typical
examples.
When you connect other components, refer also to their
manuals since the terminal names actually printed on the rear
may vary.
TV
MD recorder,
Amplifier etc.
Digital audio
equipment
To a wall outlet
Plug the AC power cord only after all connections are complete.
4
VIDEO INPUT
VIDEO INPUT
Green
Y
Blue
P
B
Red
P
R
OPTICAL
DIGITAL IN
AM loop antenna (supplied)
Turn it until the best reception is
obtained.
SCART cord (not supplied)
• This connection only sends the video signals
(Composite, Y/C, or RGB).
Component video cord (not supplied)
AV COMPU LINK terminal
• For future use.
Optical digital cord (not supplied)