Change Am Frequency Step 9Khz/10Khz (Toggle); Tray Lock/Unlock (Toggle); System Micon Cold Start; System Micon Soft Reset - JVC MX-JE3 Service Manual

4. Change AM frequency step 9kHz/10kHz (Toggle)

Press the STANDBY/ON button while
pressing the STOP button on the main
unit at standby.
FL indication
AM ##
Setting of AM frequency is completed.
AM frequency changes by the same operation again.

5. Tray LOCK/UNLOCK (Toggle)

Press the OPEN/CLOSE button while
pressing the STOP button on the main
unit at standby.
FL indication
XXXXX
Setting of tray LOCK/UNLOCK is completed.
Setting of LOCK/UNLOCK changes by the same operation again.

6. System micon cold start

Insert the power cord in an outlet while
pressing the CANCEL and
on the main unit.
This unit returns to initial setting.

7. System micon soft reset

Press the STANDBY/ON button while
pressing the CANCEL and PAUSE
buttons on the main unit at standby.
System micon is initialized.
8. Setting of DVD NTSC mode
Insert the power cord in an outlet while
pressing the SET and
the main unit.
Press the STANDBY/ON button
on the main unit at standby.
Setting of DVD NTSC mode is completed.
This setting is maintained after having been cut off.
## : 9K or 10K
XXXXX : LOCKED or UNLOCKED
buttons
buttons on
(No.MB385)1-37