Listening To The Radio - JVC GVT0125-003A Instructions Manual

Listening to the Radio

To select the band (FM/AM)
To tune in to a station
While FM or AM is selected...
1
sec.
Increases the frequency.
Decreases the frequency.
When a station (frequency) with sufficient signal strength is
tuned in, the frequency search stops.
• When you repeatedly press the button, the frequency
changes step by step.
• You can also use 1/¡ buttons on the main unit.
To stop searching manually, press either button.
If the received FM station is hard to listen
(holding then...)
INFO
FM AM
Remote
ONLY
The MONO indicator
lights on the display.
Reception will improve
though stereo effect is
lost—monaural
reception mode.
To restore the stereo
effect, press the button
again (the MONO
indicator goes off).
Main Unit
ONLY
To preset Stations
You can preset 30 FM and 15 AM stations.
1
Tune in to a station you want to preset, then enter into
the presetting mode.
SET
/DISPLAY
2
Select a preset number for the station you store.
3
Store the station.
SET
/DISPLAY
To turn in to a Preset Station
1
Select the band (FM or AM).
2
Select a preset number for the station you store.
Examples:
To select preset number 5, press 5.
To select preset number 15, press
+10, then 5.
To select preset number 30, press
+10, +10, then 10.
• You can also use the PRESET
+/– control on the main unit.
FM AM
13