Connecting The Ac Power Cord; Compu Play; Automatic Power On - JVC FS-V5 Instructions Manual

Connecting the AC Power Cord

Firmly insert the supplied AC power cord into the AC inlet on the back of the Unit.
CAUTIONS:
• ONLY USE THE JVC POWER CORD PROVIDED WITH THIS SYSTEM TO AVOID MALFUNCTION OR DAM-
AGE TO THE SYSTEM.
• BE SURE TO UNPLUG THE POWER CORD FROM THE OUTLET WHEN GOING OUT OR WHEN THE SYS-
TEM IS NOT IN USE FOR AN EXTENDED PERIOD OF TIME.
Now you can plug the AC power cord into the wall outlet, and your System is at your command!

COMPU PLAY

JVC's COMPU PLAY feature lets you control the most frequently used System functions with a single touch.
With One Touch Operation you can play a CD, a tape, turn on the radio, or listen to an external equipment with a single press of the play button
for that function. One Touch Operation turns the power on for you, then starts the function you have specified. If the System is not ready (no
CD in place), the System still powers on so you can insert a CD.
How One Touch Operation works in each case is explained in the section dealing with that function.
The COMPU PLAY buttons are:
On the Unit
#¥8
CD button
TUNER BAND button
TAPE @ # button
MD/AUX button

AUTOMATIC POWER ON

The System automatically turns on with the following operation.
0
• When you press the CD button, the System automatically turns on and the CD cover opens to allow CD insertion. However, this opera-
tion does not change the function to CD.
When you press the POWER button to turn off the System, the CD cover will automatically closed if it is opened.
5
AC IN
On the Remote Control
#8
CD button
TUNER BAND button
TAPE @ # button
MD/AUX button
Power cord