Using External Equipment - JVC FS-V100 Instructions Manual

Using External Equipment

AUX
AHB PRO
VOLUME +, –
Listening to External
Equipment
You can connect an audio equipment — used only as a playback
device.
First make sure that the external equipment is properly
connected to the System. (See page 4.)
1 Set the VOLUME control to the minimum
position.
2 Press the AUX button.
"AUX" appears on the display.
3 Start playing the external equipment.
4 Adjust the VOLUME control to the desired
listening level.
5 Apply sound effects, if you wish.
Press the AHB PRO button to reinforce the bass sound.
Press the BASS/TREBLE button on the Remote Control to
control the tone. (See "Controlling the Tone (Bass/Treble)" on
page 7.)
To exit from AUX mode, select another source.
Notes:
• For operation of the external equipment, refer to its
Instructions.
• For recording from the external equipment, refer to "Standard
Recording" on page 14.
16
EN10-22.FS-V100[J]f
POWER
FM AUTO
SLEEP DISPLAY
MODE PRESET
TAPE CD
AUX FM/AM
CD
REPEAT UP
PROGRAM SET
BASS
RANDOM DOWN
AHB
BASS TREBLE CANCEL
PRO
TREBLE
VOLUME
REMOTE CONTROL RM-SFSV10J
16
STANDBY
AHB
AUX PRO
POWER
AUX
REC TIMER
REV
CLOCK
MODE
TAPE FM/AM CD
PHONES
DOWN MULTI CONTROL UP
12/12/00, 10:33 AM
AHB PRO
VOLUME
VOLUME +, –
CD
OPEN/CLOSE