Venini VEF91GG Installation Instructions Manual page 6

Overall dimensions (with legs adiusted to 180mm).
Height over hob:
Height over upstand:
Width:
Depth: (incl. oven door
Depth: (flush with oven door):
connection
Electrical
The electric lead and plug are for connection to a 10 Amp socket. A 10 Amp
socket is to be within 1 m of the appliance.The lead is situated at the left hand side
of the cooker.
Gas regulator
The gas connection is via 1/2" compression. Connect the cooker to the gas supply
and check for gas soundness.
If using a flexible connection
This appliance is approved for connection with a Flexible Hose, which complies with
AS/NZS 1869 (AGA Approved), 10mm ID, class B or D, between 1 - 1.2m long.
Connection should be in compliance with AS 5601, clause 5.12.1.8.
When installing the hose restraint device, the appliance anchor point is the rear panel
securing.
If using copper connection
To allow the cooker to be moved forward for service make a loop in the copper tube
before connecting onto the regulator.
&
handle
knobs):
Gas and electric connection
910 mm
980 mm
895mm
660mm
610mm