Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Venini VEF91GG
Summary of Contents for Venini VEF91GG
-
Page 1: Installation Instructions
INSTALLATION INSTRUCTIONS USER INSTRUCTIONS COOKER MODEL VEF91GG 90X60 cm... - Page 2 Dear Customer, Congratulations on purchasing your new product from Think Appliances. To register your parts and labour warranty (some conditions apply please refer to your warranty card for more details) please contact out Customer Care team on: 1800 444 357 Our Customer Care centre is there to ensure you get the most out of your appliance.
- Page 3 Important information Introducing your new cooker We thank you and congratulate you on your choice. These carefully designed products, manufactured with the highest quality materials, have been carefully tested to satisfy all your cooking demands. We therefore request that you read and follow these easy instructions which will allow you to obtain excellent results right from the start.
-
Page 4: Safety Considerations
Before connecting your new cooker Before using your new cooker, please read these 'Instructions for Use' carefully. They contain important information concerning your personal safety as well as on use and care of the oven. Please keep the operating and installation instructions in a safe place; this important documentation may also be of use to a possible subsequent owner. - Page 5 Electrical supply All three models require connection to a 10 Amp wall socket. Instructions 1. The model number and the type of appliance, gas pressure and gas type are found on the inside of the oven door, centre bottom. 2. The appliance requires connection to a 240 V,50 Hz electric supply. The power point must be installed by an authorized person.
- Page 6 Overall dimensions (with legs adiusted to 180mm). Height over hob: 910 mm Height over upstand: 980 mm Width: 895mm & handle Depth: (incl. oven door knobs): 660mm Depth: (flush with oven door): 610mm Gas and electric connection connection Electrical The electric lead and plug are for connection to a 10 Amp socket. A 10 Amp socket is to be within 1 m of the appliance.The lead is situated at the left hand side of the cooker.
-
Page 7: Gas Connection
Gas connection The cooker must be connected to the gas supply with upstream connection of an isolation valve in accordance with the respectively valid regulations. We recommend that the isolation valve be fitted prior to the cooker to enable isolation of the cooker from the gas supply. -
Page 8: Test The Operation Of The Cooker Before Leaving
Test the operation of the cooker before leaving Note: These burners have no aeration adjustment. Check correct operation of the ignitions system and operation of burners individually and in combination. Burner flames should be clear blue, with no yellow tipping. If the burners show any abnormality check that the burners are correctly located. - Page 9 If the legs are not used and the cooker is mounted onto a plinth, fit transit legs to allow for clearance. Once legs are adjusted to a nominal cooker height of 910 mm, fit the anti-tilt restraint bracket. 1. Fit the flat strap to the rear at the centre point on the lower edge using the supplied screw. 2.
-
Page 10: Upstand Installation
5. Locate the cooker into correct and final position. Then from the underside front, secure into position with the self tapping screw provided. WARNING - IN ORDER TO PREVENT ACCIDENTAL TIPPING OF THE APPLIANCE, FOR EXAMPLE BY A CHILD CLIMBING ONTO THE OVEN DOOR, THE STABILISING MEANS MUST BE INSTALLED. REFER TO THE INSTRUCTIONS FOR INSTALLATION Upstand installation All stainless steel hob models are fitted with an upstand. - Page 11 4. Remove the remaining M4 CSK screws, one each end. Hob & control panel lay-out VEF91GG 1. Minute minder 2. Oven/Grill combination control Knob 3. Grill ON indicator light 4.
-
Page 12: Cooktop Burner Operation
Cooktop burner operation For cookers fitted with the optional glass lid the glass lid must always be in the open position when the cooktop burners are operating. First time use Thoroughly clean the cooktop with warm soapy water prior to first use. Cooktop burner operation The individual burner positions on the cooktop are indicated by a graphic placed above the burner control knob. -
Page 13: Oven /Grill Operation
Please state the cooker model contact the authorised service provider. number to the service agent. The model number is stated on the data plate. The data plate is located on the inside of the oven door, centre bottom. Ventilation The use of gas burners leads to the production of heat and moisture in the kitchen. For this reason make sure that the room is properly ventilated. -
Page 14: Shelf Positions
First time use Thoroughly clean the appliance and accessories with warm soapy water before using them for the first time. Operate the oven for about 30 minutes at gas mark 8 to eliminate any odours generated by the internal insulation. Cooling fan operation The cooling fan operates when the oven is switched on and will continue to operate until the oven is switched off. -
Page 15: Temperature Settings
4. Turn food only once during the grill operation to conserve natural juices. 5. The oven door must be closed when operating the grill. For browning and crisping, shelf position 2 will give best results. Shelf 2 may also be used 3 if the meat is thick or has a high fat content). -
Page 16: Oven Cooking Tips
Oven cooking tips This is a large oven. Allow at least 15 minutes preheating time before cooking commences to allow the interior to heat up to the required temperature. Personal experience will help determine any variations in the values reported in the table. In any case, it is recommended to follow the instructions of the specific recipe used. - Page 17 Grill element/browner does not come on Turn power on Power to appliance turned off Grill element/browner smoking when on Top of oven compartment soiled Clean top of oven compartment Food is not cooking to expectation User may still be using settings of previous Check cooking chart - consumer will become familiar with use...
-
Page 18: Cleaning The Cooktop
Cleaning Cleaning the cooktop Once the appliance is cold, clean it with a sponge and soapy water. Remove any spills immediately. This will avoid unnecessary work later. Allow burners and trivets to cool down before cleaning them. The burners and trivets must be cleaned regularly to keep them in good condition. This is done by submerging them in soapy water and scrubbing them with a non-metal brush to keep the ports and slots free from obstructions so they give a perfect flame. -
Page 19: Replacing The Oven Light Bulb
Cleaning oven glass door The oven door may be removed for cleaning. To remove the oven door follow the steps below: 1. Open the door fully. 2. Lift the two levers forward as shown in figure below left 3. Close the door as far as the first stop (created by the raised levers). 4. -
Page 20: Service Information
Service information Service and maintenance must only be carried out by an authorised person. This appliance should not be modified. Always disconnect the gas supply and power before servicing the cooker. After service always check connections for gas soundness. NEVER use a naked flame to check for leaks. To remove the upstand (for cookers fitted with upstand). - Page 21 Wiring diagrams model VEF91GG A copy of those diagrams is situated on the back panel of the cooker. Data plates The data plates are attached to the inside of the oven door, centre bottom. Always quote your model number when requesting a service calI.