To Unload A Cd; Basics Of Using The Cd Player-Normal Play; Programming The Playing Order Of The Tracks - JVC FS-SD1000 Instructions Manual

To Unload a CD

Take out the CD as shown below.
Basics of Using the
CD Player-Normal Play
To Play a CD
1
Insert a CD.
Press the CD #¥8 button.
2
The first track of the CD begins playing.
Track number
• The track number that has already played disappears
from the music calendar.
• The CD Player automatically stops when the last
track of the CD has finished playing.
To stop playing the CD, press the 7 button.
The following information for the CD is displayed.
Total track number
To stop playing and remove the CD, press the OPEN/
CLOSE button on the Unit or CD 0 button on the Remote
Control to open the Top Cover.
To pause, press the CD #¥8 button. The playback time
blinks on the display.
To cancel pause, press the same button again. Play con-
tinues from the point where it was paused.
Playback time
Total playback time
To Select a Track or Passage within a Track
During playback, press the 4 or ¢ (< or >) button to se-
lect the track you want.
• The selected track starts playing.
• Press the ¢ or > button once to skip to the begin-
ning of the next track.
• Press the 4 or < button to skip to the beginning of
the track being played. Press twice quickly to skip to
the beginning of the previous track.
• When the > or < button on the Remote Control is
kept pressing, the track continuously skips.
Search Play
Holding down the 4 or ¢ button, during playback, will
fast forward/backwards the CD so you can quickly find a
particular passage in the track you are listening to.
Programming the
Playing Order of the Tracks
You can program the playing order of the tracks using the
Remote Control.
I You can program up to 32 tracks in any desired order in-
cluding the same tracks.
I You can only make a program when the CD Player is
stopped.
1
Insert a CD.
Press the CD #/8 button.
2
Press the 7 button to stop the CD.
3
4
Press the PROGRAM button.
The System enters the programming mode and the
"PROGRAM" indicator lights up.
PROGRAM
PROGRAM
5
Press the UP, DOWN, >, or < button to
select the track to program.
UP or > button: Increases the track number by 1.
DOWN or < button:Decreases the track number by 1.
• When the > or < button is kept pressing, the track
number changes rapidly.
(To be continued on the next page)
Using the CD Player
15