Acura 2014 RDX REMOTE CONTROL Installation Instructions Manual page 6

11. Pull away the driver's door opening seal from around
the driver's dashboard side cover.
2 CLIPS
3 HOOKS
DRIVER'S DASHBOARD
SIDE COVER
12. Remove the driver's dashboard side cover (two
clips, three retaining tabs, and three hooks).
13. Release the driver's front door sill trim (five clips and
two retaining tabs).
3 CLIPS
DRIVER'S FRONT
DOOR SILL TRIM
6 of 25
DRIVER'S DOOR
OPENING SEAL
(Pull away.)
3 RETAINING
QB22908AK
TABS
Raise.
FRONT
2 RETAINING
TABS
2 CLIPS
QB22909AK
14. Pull away the door opening seal, and remove the
driver's kick panel (two clips).
DOOR OPENING
SEAL
(Pull away.)
15. Reconnect the negative cable to the battery. Press
the engine start/stop button to select the ON mode.
Lower the tilt lever, and release the column band
(two clips).
COLUMN
BAND
2 CLIPS
BII 48865 (1303)
DRIVER'S
KICK PANEL
STEERING
WHEEL
UPPER COLUMN
COVER
STEERING
WHEEL
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
2 CLIPS
QB22910AK
QA00802BX