Routing The Engine Starter Harness - Acura 2014 RDX REMOTE CONTROL Installation Instructions Manual

Routing the Engine Starter Harness

34. Route the engine starter harness as shown. Attach
the clip on the engine starter harness to the vehicle
frame.
VEHICLE
FRAME
ENGINE STARTER
HARNESS
12 of 25
CLIP ON THE ENGINE
STARTER HARNESS
ENGINE
STARTER
HARNESS
RELAY
BLOCKS
QB21401AK
BII 48865 (1303)
35. Using scissors, cut one urethane tape to the
measurements shown. Wrap the cut urethane tape
around the engine starter harness 5-pin connector.
VIEW FROM
URETHANE SIDE
20 mm (0.8 in.)
25 mm
(1.0 in.)
URETHANE
TAPE
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
ENGINE STARTER HARNESS
5-PIN CONNECTOR
ENGINE STARTER
HARNESS
QB21402AK