Acura 2014 RDX REMOTE CONTROL Installation Instructions Manual page 10

Remote control engine starter
Hide thumbs Also See for 2014 RDX REMOTE CONTROL:
Table of Contents

Advertisement

Fold back the adhesive backing from the
antenna as shown.
ANTENNA
Using isopropyl alcohol on a shop towel, clean
the windshield where the antenna will attach.
Attach the antenna with masking tape. Adjust
the position of the antenna so there is equal
spacing on both sides.
Clean with
isopropyl alcohol.
HEADLINER
Equal spacing on both sides.
MASKING TAPE
10 of 25
ADHESIVE
BACKING
QB51401CH
ANTENNA
ANTENNA
QB51404CH
Carefully remove the adhesive backing from the
antenna, and attach the antenna to the
windshield. Press and hold the antenna firmly in
place for 30 seconds.
Remove the masking tape.
ADHESIVE
BACKING
(Remove.)
30. Gently pull down the headliner, and tuck the antenna
cable under the headliner. Be careful not to crease
the headliner.
HEADLINER
BII 48865 (1303)
ANTENNA
MASKING
TAPE
(Remove.)
ANTENNA
ANTENNA
CABLE
© 2013 American Honda Motor Co., Inc. – All Rights Reserved.
QB51405CH
QB20902CK

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents