Preface; Precautions And General Instructions; Buying Spare Parts - Royal Enfield Bullet Workshop Manual

PREFACE
-
We take pleasure in releasing this Maintenance Manual a s a guide t
-
senice. Most of the servicing can well done by the average owner. N
diagrammatic Sketches and photo illustrattons have been introduced for better
understanding. However for an owner who feels uncertain of his ability to, undertake
-
any stripping and re-building for
a
major overhaul, we strongly reco
work be done by a n authorised 'ENFIELD DEALER/DISTRIBUTOR
that the use of proper service maintenance tools and genuine Enfield
best results.
-
Whilst every care
is
taken to ensure that the information i n this manu
no liability can be accepted by Royal Enfield or the publisher for 10s
or injury caused due to errors or omissions in the informations given.
PRECAUTIONS
AND GENERAt INSTRUCTIONS
Observe the following points without fail, when dismantling a n d
reassembhg Motor-cycle parts.
-
Be sure to replace packings, gaskets, circlips.
'0'
rings and cotter pins
with new ones, for 'safe riding'.
.
-
Tighten bolts
&
nuts starting from the larger diameter ones to the smaller
diameter and from inside to outside diagonally, with specffied tightening
torque.
-
Use always genuine spares and recommended grade of oils only.
When using a torque wrench for checking, always loosen the bolt or nut
by half turn and then tighten to the specified torque. Never use torque
wrench for loosening
a
bolt or nut.
L
B ~ . G
SPARE PARTS
n
When ordering spare parts for your Motorcycle it is advisable to deal direct with
the Enfield official dealer/distributor, who should be able to supply most of the
parts ex-stock.
\
Always quote the Engine Number and Frame Number and description of part required.
It
is
advisable to indicate the colour scheme especially while ordering parts for frame.
side panels,tank, mudguards, etc.,
/