Remote Control - Pioneer VSX-D710S Service Manual

Remote Control

SOURCE
1
2
DVD TV
MULTI CONTROL
3
RCV CD
1
MIDNIGHT 5.1 / 7.1
4
4
7
10
DTV INFO MPX/RETURN
¶
7
5
BAND CLASS
1 ¡
2
/DTS DSP
6
CH SELECT CH LEVEL
7
LOUDNESS
FL DIMMER
8
TUNE
ST
ENTER
TUNE
CHANNEL
VOLUME
MENU
TVFUNC
9
TV CONTROL
AV PRE-PROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
1 SOURCE
button
Use to turn on/off other components connected to the
receiver.
2 MULTI CONTROL buttons
Use to put the receiver/remote control in the stated
mode.
3 RCV button
Use this button when setting up the surround sound for
the receiver. Also press it if you want to use special
features attached to some of the number buttons, for
example MIDNIGHT, 5.1/7.1, or ATT.
#
RECEIVER
@
VCR CD-R
TUN
TVC
2 3
ATT
5 6
EFFECT
8 9
DISC
!
0
ENTER
D.ACCESS GUIDE
3
8
DTV ON/OFF DTV MENU
4 ¢
TEST TONE SIGNAL SELECT
FUNCTION
SETUP MUTING
ST
~
=
MASTER VOLUME
-
TV
0
4 NUMBER/MODE buttons
Use the number buttons to select the radio frequency in
tuner DIRECT ACCESS mode or the tracks in CD, DVD
mode etc.
Also, buttons marked with the following names have
special functions. If you try to use one of these functions
but the display flashes it means that function cannot be
used in the current mode (for example DSP modes
cannot be used when 5.1 Ch setting is on).
MIDNIGHT
Use to put receiver in MIDNIGHT mode. To use first press
the button then operate this button.
RCV
5.1 Ch (VSX-D710S)
When the DVD/LD or DVD 5.1/7.1 Ch function is selected
each press switches the DVD/LD input between DVD/LD
and DVD 5.1/7.1 Ch. To use first press the
then operate this button.
ATT
When the overload indicator lights use this button to
attenuate (lower) the level of an analog input signal and
prevent distortion. To use first press the
operate this button.
EFFECT +/– buttons
Use to add or subtract the amount of effect in different
DSP sound modes (except 6 Ch Stereo) or advanced
listening modes.
To use first press the
RCV
buttons.
5 THE FOLLOWING BUTTONS ARE BOTH CONTROLS
FOR OTHER COMPONENTS (LIKE A DVD PLAYER)
AND DEDICATED TUNER CONTROLS. THE TUNER
CONTROLS ARE EXPLAINED HERE. YOU CAN USE
THEM AFTER YOU HAVE PUSHED THE TUNER MULTI
CONTROL BUTTON.
BAND button
Use to switch between the AM and FM band when in
TUNER mode.
CLASS button
Use to switch between the three banks (classes) of
station memories.
MPX/RETURN button
Use to switch between auto stereo and mono reception of
FM broadcasts. If the signal is weak then switching to
MONO will improve the sound quality. Also, this is the
pause button for CDs, tapes, DVDs, etc.
D. ACCESS button
Use to directly access a radio station by pressing the
number of the station you want.
DTV INFO button
Use to bring up information screens on a digital TV.
DTV MENU button
Use to bring up menus on a digital TV.
DTV ON/OFF button
Use to turn a digital TV on/off.
GUIDE button
Use to bring up the guides on a digital TV.
VSX-D710S
button
RCV
button then
RCV
button then operate these
61