Toshiba e-studio352 Network Fax Manual page 19

Hide thumbs Also See for e-studio352:
Table of Contents

Advertisement

This section describes about installing the N/W-Fax driver and Address Book Viewer in an SMB
environment. The N/W-Fax driver can be set up using the same connection as a printer driver
such as USB printing, LPR printing, IPP printing, and Novell printing. To set up the N/W-Fax
driver using these connections, please refer to the Printing Guide.
Installing from Client Utilities CD-ROM
This section describes how to install the fax client software in an SMB environment which is
available for a local area network using TCP/IP.
To set up the N/W-Fax driver in other connections, please refer to the Printing Guide.
Before installing the printer driver in an SMB environment, confirm the following:
- This equipment is connected to the network and turned on.
- The TCP/IP setting is correct on this equipment and your computer.
Installing the fax client software for SMB printing using the installer
The following describes an installation on Windows XP. The procedure is the same when other
versions of Windows are used.
You must log into Windows as a user who has the "Administrators" or "Power Users" privi-
lege. You must log into Windows as a user who has the "Administrators" privilege when
using Windows XP/Server 2003/Vista.
Only users with the administrator privilege can perform this on Windows Vista.For users
without the administrator privilege, installation on Windows Vista is possible by performing
the following procedure and having the administrator privilege temporarily.
- Select "Open folder to view files" in the AutoPlay menu and click [OK].
- Open the Clienth folder, click "Setup.exe" and then select "Run as administrator".
- Enter the administrator's password of the client computer to operate with an administra-
tor's privilege and click [OK].
1
Insert the Client Utilities CD-ROM into the CD-ROM drive.
The installer automatically starts and the Choose Setup Language dialog box
appears.
If the installer does not automatically start, double-click "Setup.exe" in the Client Utili-
ties CD-ROM.
2
Select your language and click [OK].
The License Agreement screen is displayed.
Installing Network Fax Software
19

Advertisement

Table of Contents
loading

Table of Contents