How To Use The Detergent Injector - Landa PE3-1100 Operator's Manual

PE SERIES PRESSURE WASHER
HOW TO USE THE
DETERGENT INJECTOR
WARNING: Some detergents may
WARNING
be harmful if inhaled or ingested
causing severe nausea, fainting
or poisoning. The harmful ele-
ments may cause property dam-
age or severe injury.
SOME DETERGENTS
The machine can siphon and mix
MAY BE HARMFUL
detergents with the use of Landa's
IF INHALED OR
detergent injector kit.
INGESTED
1. Turn off machine and water supply. Squeeze spray
gun to relieve pressure before attaching detergent
injector.
2. Pull injector quick coupler collar back and secure on
discharge nipple. Injector valve body arrow should
point in direction of flow.
3. Connect high pressure hose to injector nipple se-
curing quick coupler.
Spray
Gun
Discharge Nipple
Detergent
Injector
Detergent
Pick-up Tube
Wand
High Pressure
Hose
Trigger
LANDA PE • REV 10/02
OPERATOR'S MANUAL
4. Start machine as outlined in Operating Instructions.
5. Place detergent pick-up tube into container of deter-
gent solution.
6. Install the brass soap nozzle provided with the in-
jector into the quick coupler of the wand.
7. Open spray gun. Water detergent ratio is approxi-
mately 15 to 1.
8. When you finish washing, rinse by simply releasing
the spray gun, removing the soap nozzle, and re-
placing the pressure nozzle back into quick coupler.
NOTE: The detergent injector will not siphon with
the high pressure nozzle at the end of the wand.
9. If your machine has a variable pressure wand, turn
the pressure control handle counterclockwise to
lower the pressure by directing the water flow through
the soap nozzle which allows the detergent injector
to siphon soap. To rinse with high pressure water,
simply turn the control handle clockwise.
10. For clean up, place detergent pick-up tube into con-
tainer of clear water and follow steps 5 and 8 to pre-
vent detergent deposits from damaging the injector.
Quick Coupler
Detergent Bucket
(not included)
7
Pressure Nozzle
Soap Nozzle
Nozzle
Quick
Coupler