Connecting Equipment With Hdmi Connectors; Connecting The Playback Components - Denon S-302 Owner's Manual

ENGLISH
I
Connecting Equipment with HDMI Connectors
Digital video and digital audio can both be connected using a single HDMI cable.
-N·n.
o When playing multichannel sources, the audio output is downmixed to two channels for output. In
addition, the sampling frequency is lowered to 48 kHz.
o Video signals are not output properly when using devices that are not HDCP-compatible.
oUse a cable on which the HDMIIogo is indicated (a certified HDMI product) for connection to the HDMI
connector. Normal playback may not be possible when using a cable other than one on which the HDMI
logo is indicated (a non-HDMI-certified product).
o The audio signals output from the HDMI connector (sampling frequency, bit rate, etc.) may be restricted
by the connected device.
If the connected TV is only compatible with DVI-D terminals, use an HDMI/DVI conversion cable.
When connecting with an HDMIIDVI converter cable (adapter)
o HDMI video signals are theoretically compatible with the DVI format.
When connecting to a TV, etc., equipped with a DVI-D terminal, connection is possible using an HDMI/
DVI converter cable, but depending on the combination of components in some cases the video signals
will not be output.
• When connecting using an HDMI/DVI converter adapter, the video signals may not be output properly
due to poor connections with the connected cable, etc.
OVI-O-compatible
OVI-O-compatible
HOMI-compatible
monitor
monitor
Condition of signals
monitor (HOCP non
from the 5-302'5
HOMI
(HOCP compatible)
compatible)
output terminal
Both video and audio
Only video output
* Neither video nor audio
output output
*:
Only output when video signals are of RGB format.
12
Copyright protection system
In order to play the digital video and audio signals of a DVD Video disc using HDMI connections, both the
connected DVD player andTV must be equipped for a copyright protection system called "HDCP" (High-
bandwidth Digital Content Protection).
HDCP is a copy protection technology consisting of data encoding and mutual identification of the
devices. The S-302 is HDCP-compatible. Check the operating instructions of your TV to see if they are
compatible.
Setting the HOMI output resolution
Set the resolution of the video signals output from the HDMI output terminal to a resolution with which the
connected devices are compatible. Press HOMI on the remote control unit to select.
r
480p/576p - nop - 1080i - 1080p - AUTO
~
Connecting the Playback Components
Carefully check the left
(L)
and right (R) channels and the inputs and outputs, and be sure to interconnect
correctly.
II
Control Dock for iPod
Use either a DENON Control Dock for iPod
(ASD-l R, sold separately) or an iPod cable
(AK-Pl00, sold separately) to connect the S-
302 and an iPod.
• When using the Control Dock for iPod,
certain settings must be made on the
Control Dock for iPod. For details, refer
to the Control Dock for iPod's operating
instructions.
• When using an iPod, refer to "iPod®
Playback" (@"'page 33).