Tire Inspection; Brakes; Periodic Brake Test For Mechanical Brakes - E-Z-GO MPT 800 Owner's Manual

Read all of manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notes, Cautions and Warnings
FRONT SPRINGS
FRONT WHEEL ALIGNMENT
PARK BRAKE
REAR SHOCK ABSORBERS
HARDWARE AND FASTENERS
SEMI-ANNUAL - 125 HOURS
DIRECTION SELECTOR
KING PINS
STEERING ASSEMBLY
RACK END BALL JOINT
REAR AXLE
ANNUAL - 250-300 HOURS
FRONT WHEEL BEARINGS
REAR AXLE
SERVICE BRAKES
(HYDRAULIC BRAKES)

TIRE INSPECTION

Tire condition should be inspected per the Periodic Ser-
vice Schedule (Ref. Fig. 21 on page 16). Inflation pres-
sures should be checked when the tires are cool. Be sure
to install the valve dust cap after checking or inflating.

BRAKES

!
travel before operating a vehicle to verify some brak-
ing function is present.
All driving brake tests must be done in a safe location
with regard for the safety of all personnel.
Over time, a subtle loss of performance may
take place; therefore, it is important to establish
the standard with a new vehicle.
OPERATION AND SERVICE INFORMATION
Check for loose hardware, cracks at attachments
Check for unusual tire wear, align if required
Check for bent/binding linkage rod
Check for damage or wear to latch arm or catch bracket
Lubricate as required, use light oil. DO NOT LUBRICATE CABLES OR BRAKE
LATCH
Check for oil leakage, loose mounting hardware
Check for loose or missing hardware and components
Tighten or replace missing hardware
Check for wear and smooth movement (lubricate shaft with light oil if required)
Check for excessive play and tightness of retaining nuts
Check bellows and pinion seal for damage or grease leakage
Lubricate, use wheel bearing grease
Check for unusual noise and loose or missing mounting hardware
Check and adjust as required, see Technician's Repair and Service Manual
Check lubricant, add lubricant (SAE 30 oil) as required
Clean and adjust, see Technician's Repair and Service Manual
Check brake shoe linings, see Technician's Repair and Service Manual
Check brake fluid
Fig. 21 Periodic Service Schedule
To reduce the possibility
!
of severe injury or death,
always evaluate pedal
Owner's Manual and Service Guide
(includes items listed in previous tables & the following)
(includes items listed in previous tables & the following)
The Periodic Brake Performance Test should be per-
formed regularly (Ref. Fig. 21 on page 16) as an evalua-
tion of braking system performance. It is useful as a
method of identifying subtle loss of performance over
time.

Periodic Brake Test for Mechanical Brakes

The purpose of this test is to compare the braking perfor-
mance of the vehicle to the braking performance of new
or 'known to be good' vehicles or to an established
acceptable stopping distance. Actual stopping distances
will be influenced by weather conditions, terrain, road
surface condition, actual vehicle weight (accessories
installed) and vehicle speed. No specific braking distance
can be reliably specified. The test is conducted by latch-
ing the parking brake to eliminate different pedal pres-
sures and to include the affects of linkage mis-
adjustment.
Page 17