WWW.MANUALS.WS
Windshield wipers and washer
To turn on the windshield wipers, move
the lever to the desired setting.
The key must be in the "ON" position.
There are 3 settings:
1. "INT" position: Intermittent operation
2. "LO" position: Low speed operation
3. "HI" position: High speed operation
Twist the interval adjuster upward to in-
crease the wiping time interval between
sweeps, and downward to decrease it.
110
WWW.MANUALS.WS
To squirt washer fluid, pull the lever
toward you.
If the windshield wipers are off, they will
operate a couple of times after the washer
squirts.
For instructions on adding washer fluid,
see "Adding washer fluid" on page 285.
In freezing weather, warm the windshield
with the defroster before using the washer.
This will help prevent the washer fluid
from freezing on your windshield, which
can block your vision.
NOTICE
Do not operate the wipers if the wind-
shield is dry. It may scratch the
glass.
When waxing your vehicle, make sure that
the
washer
nozzles
do
not
become
blocked. If a nozzle becomes blocked,
contact your Toyota dealer to have the
vehicle serviced.
NOTICE
If a nozzle becomes blocked, do not
try to clear it with a pin or other
object. The nozzle will be damaged.
'03 L/C U (L/O 0301)
Rear window wiper and washer
To turn on the rear window wiper, twist
the lever knob upward.
The key must be in the "ON" position.
There are 2 settings:
1. "INT" position: Intermittent operation
2. "ON" position: Low speed operation
To squirt washer fluid on the rear window,
twist the knob upward or downward as far
as it will go (position 3 or 4). The knob
automatically returns from these positions
after you release it.
For instructions on adding washer fluid,
see "Adding washer fluid" on page 285.