Basic Procedure - JVC CA-UXA7DVD Instructions Manual

Using the setting menu, you can store the initial selection
for audio languages (sound) and subtitle languages for
DVD playback as well as other settings.
Setting menu
• LANGUAGE menu (see page 57)
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ON SCREEN LANGUAGE
PRESS KEY
• AUDIO menu (see page 57)
DIGITAL AUDIO OUTPUT
DOWN MIX
COMPRESSION
PRESS KEY
• DISPLAY menu (see page 58)
MONITOR TYPE
SCREEN SAVER
ON SCREEN GUIDE
PRESS KEY
• SYSTEM menu (see page 58)
RESUME
AV COMPULINK MODE
PRESS KEY
ENGLISH
ENGLISH
ENGLISH
ENGLISH
EXIT
Usable
buttons
STREAM/PCM
Lo / Ro
ON
EXIT
4:3 LB
MODE 2
ON
EXIT
OFF
DVD 1
EXIT

Basic Procedure

The setting menu appears only when the selected source is
the DVD player and the disc is not played back.
• When an Audio CD or MP3 disc is loaded, you cannot show
the setting menu.
On the remote control ONLY:
1
Press CHOICE while holding down SHIFT.
The LANGUAGE menu appears on the TV.
2
Press Cursor 3/2 to move
want—LANGUAGE, AUDIO, DISPLAY, or
SYSTEM.
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ON SCREEN LANGUAGE
PRESS KEY
Ex.: When selecting LANGUAGE menu.
3
Press Cursor ∞/5 to move
to set.
A selected item shows in green.
MENU LANGUAGE
AUDIO LANGUAGE
SUBTITLE
ON SCREEN LANGUAGE
PRESS KEY
Ex.: When selecting "MENU LANGUAGE."
4
Press Cursor 3/2 to select a proper setting you
want.
5
To set other items on the same menu, repeat steps 3
and 4 .
To set other items on the different menus, repeat
steps 2 to 4 .
6
When finished, press Cursor ∞ to move
"EXIT," then press ENTER.
The setting menu disappears.
To exit from the setting menu any time during the
above procedure, press CHOICE while holding down
SHIFT. The setting menu disappears.
The settings you have done up to that time will be stored.
to the menu you
ENGLISH
ENGLISH
ENGLISH
ENGLISH
EXIT
to an item you want
ENGLISH
ENGLISH
ENGLISH
ENGLISH
EXIT
to
56