Preference / Video Settings - Daewoo DF-4500P User Manual

DF-T35-37D2P-WB 2006.8.24 4:57 PM
'Preferences' / Video Settings
1
Press [SETUP]. The Setup menu appears.
While 'Init Setup' is selected, press [ENTER] to go to the initial setup
page.
2
Use [œ/√] to select 'Preferences
3
While 'Preferences
4
Press [√]. The 'Video' submenu is displayed.
TV Aspect Ratio
1
Use [.../†] to select 'TV Aspect' while the 'Video' submenu is
displayed.
2
Press [√] to go to the second level.
3
Use [.../†] to select the desired TV Aspect.
4
Press [ENTER] to confirm your selection.
5
Press [SETUP] to exit the menu.
4:3 PS :
Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both
sides of the picture are cut off.
4:3 LB :
Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and
below the picture.
16:9 :
Select when a 16:9 wide screen TV is connected.
TV Aspect can be used only for DVD disc playback. But some kinds of DVD discs doesn't support TV Aspect.
Video Output
Progressive Scan Video provides the highest picture quality with reduced
flickering.
Interlace or Progressive :
television (DTV) or Monitor using the COMPONENT jacks, set Video Output
to 'Interlace' or 'Progressive'.
RGB :
If you connect the DVD Recorder+VCR to a analog television using
the SCART jacks, set Video Output to 'RGB'.
Follow the same procedure as TV Aspect Ratio to change the Video Output.
Caution
Once the Progressive Scan setting is entered, an image will only be visible on a Progressive Scan compatible TV or
monitor.
22
˘ ` 22 mac001
'.
' is selected, press [†] to select 'Video'.
If you connect the DVD Recorder+VCR to a digital
1200DPI 90LPI
Preferences
•Video TV Aspect
Audio Video Output
Parental Ctrl
Auto Settings
VCR
Modulator Out
...
œ √ Choose ENTER OK
†
Preferences
Video • TV Aspect
Audio Video Output
Parental Ctrl
Auto Settings
VCR
Modulator Out
œ √ ... Choose OK
ENTER
†
Preferences
Video TV Aspect
Audio • Video Output
Parental Ctrl
Auto Settings
VCR
Modulator Out
œ √ ... Choose ENTER OK
†
Initial Setup
4:3 PS
Interlace
SETUP Exit
4:3 PS
4:3 LB
16:9
Exit
SETUP
Interlace
Progressive
RGB
SETUP Exit