Table of Contents
Advertisement
Video Setup
A user can set up a connected TV condition and screen.
While STOP
, press [SETUP] button.
1
Selecting TV Aspect.
2
Set your preferred TV ASPECT ratio with
[ENTER] button.
If a user selects "4:3 PS", the user can watch
only a center of the original scene of "16:9". If a
user selects "4:3 LB", the user can watch the
original scene of "16:9", but the top and bottom
of the screen look black color.
If a disc size is originally recorded in 4:3, a user
cannot watch it in a wide screen though a user
sets a size as "16:9 Wide".
DivX® REG.
3
Please use this code to register this player with
the DivX® Video On Demand service.
This will allow you rent and purchase video
using the DivX® Video On Demand format.
To learn more go to www. divx.com/vod.
Your Registration Code is : ******** .
54
VIDEO SETUP
TV ASPECT
4:3 LB
DivX® VOD
ENTER
SETUP
VIDEO SETUP
TV ASPECT
4:3 PS
DivX® VOD
4:3 LB
16:9 WIDE
ENTER
SETUP
VIDEO SETUP
DivX® Video On Demand
Your registration code is :
MRI2ZQXT
To lean more visit www.divX.com/vod
OK
SETUP
ENTER
Audio Setup
A user may select audio menu according to a user's speaker set.
While STOP or Resume STOP, press
1
[SETUP] button.
Select a Digital Output.
2
Set audio output to coaxial. You can set the
outgoing digital signal to BITSTREAM or
LPCM:
• BITSTREAM : The raw audio signal
recorded on the disc goes to the digital
audio output.
• LPCM : The decoded audio signal goes
to the digital audio output.
Select a Dynamic Range.
3
Select the Dynamic Range and set the level
using the [.../†] button. Then press the
[ENTER] button.
• Off : You can hear the sound as it was
originally recorded on the disc.
• Full : You can hear loud sounds softer
and soft sounds louder.
AUDIO SETUP
DIGITAL OUT
BITSTREAM
DYNAMIC RANGE
ENTER
SETUP
AUDIO SETUP
DIGITAL OUT
BITSTREAM
DYNAMIC RANGE
LPCM
ENTER
SETUP
AUDIO SETUP
DIGITAL OUT
FULL
DYNAMIC RANGE
3/4
1/2
1/4
OFF
ENTER
SETUP
55
Advertisement
Table of Contents
