Video Setup; Audio Setup - Daewoo SH-7500D Instruction Manual

Video Setup

A user can set up a connected TV condition and screen.
While STOP or RESUME STOP, press
1
[SETUP] button.
Selecting TV Aspect.
2
Set your preferred TV ASPECT ratio with
[ENTER] button.
If a user selects "4:3 PS", the user can watch
only a center of the original scene of "16:9". If a
user selects "4:3 LB", the user can watch the
original scene of "16:9", but the top and bottom
of the screen look black color.
If a disc size is originally recorded in 4:3, a user
cannot watch it in a wide screen though a user
sets a size as "16:9 Wide".
Selecting SCAN MODE.
3
You may set SCAN MODE to INTERLACED or
PROGRESSIVE.
* If SCAN MODE is set to "INTERLACED",
connect Y/Pb/Pr on the DVD+VCR to the
INTERLACED input on your TV.
If SCAN MODE is set to "PROGRESSIVE",
connect Y/Pb/Pr on the DVD+VCR to the
PROGRESSIVE SCAN input on your TV.
52
All manuals and user guides at all-guides.com
TV ASPECT 4:3 LB
SCAN MODE INTERLACED
TV ASPECT 4:3 LB
SCAN MODE 4:3 PS
16:9 WIDE
TV ASPECT INTERLACED
SCAN MODE PROGRESSIVE

Audio Setup

A user may select audio menu according to a user's speaker set.
1 While STOP or Resume STOP, press
[SETUP] button.
Select a Digital Output.
2
Set audio output to coaxial or optical. You
can set the outgoing digital signal to
BITSTREAM or LPCM:
• BITSTREAM : The raw audio signal
recorded on the disc goes to the digital
audio output.
• LPCM : The decoded audio signal goes
to the digital audio output.
Select a Dynamic Range.
3
You can set the Dynamic Range as follows:
• Off : You can hear the sound as it was
originally recorded on the disc.
• Full : You can hear loud sounds softer
and soft sounds louder.
DIGITAL OUT BITSTREAM
DYNAMIC RANGE OFF
DIGITAL OUT BITSTREAM
DYNAMIC RANGE LPCM
DIGITAL OUT
DYNAMIC RANGE FULL
OFF
53