Rear Seat - Mazda RX-8 2010 Owner's Manual

NOTE
The operation cancels in the following cases:
A seat adjustment switch other than a
l
lumbar support switch is operated.
The set button is operated.
l
Any programming button
l
pressed.
The vehicle moves or starts to move.
l
The seat stops moving when it returns to
its on-road position. A beep sound is
heard at this time.
NOTE
Pressing and holding the lower part of the
l
switch again after the seat has returned to
its on-road position will move the seat
farther rearward.
Vehicle maintenance or other reasons
l
requiring the vehicle battery to be
disconnected will result in the seat position
memory being erased. As a result, the seat
will continue to slide rearward and the
seatback will lower rearward. Operate a
switch other than a lumbar support
adjustment switch to adjust the seat
position.
is
Make sure luggage and cargo is
secured before driving:
Not securing cargo while driving is
dangerous as it could move or be
crushed during sudden braking or a
collision and cause injury.
Do not allow anyone to sit on the
center console between the rear seats:
Allowing someone to sit on the rear
center console between the rear seats
is dangerous. The rear center console
is not designed for occupant seating.
During a collision, occupants not
wearing a seat belt could be thrown
from the vehicle and seriously injured
or even killed.
Essential Safety Equipment

Rear Seat

WARNING
Seats
2-11