Samsung MH020FPEA Service Manual page 64

4-1-4 MH✳✳✳FDEA (Silhouette Duct)
No Parts
1 Filter-Pre
2 Blower
&
Duct
Samsung Electronics
Procedure
1) Disassemble screws of indication part and
then assemble the direction of
2 Plate-Handle places by use of screw
as shown in 2).
2) Turn the Plate Handle by hand when
removing the Filter-Pre.
3) When pulling the Filter-Pre handle,
the Filter-Pre can be assembled.
✳ Be sure to remove the cushion on the
marked part after initial installation.
(It cause the damage of noise).
1) After disassembling places indicating screws,
detach Ass'y Cover Bottom.
Disassembly and Reassembly
Remark
4-17