Setting The Screen Messages; Setting The Brightness - JVC CA-MXDVA5 Instructions Manual

Setting the Screen Messages

During disc operation, it is recommended to set this function
to "ON" so that you can confirm what you are doing on the
TV screen.
To go back to the previous screen during the procedure,
press RETURN.
1
Press SETUP.
Setup menu appears on the TV screen.
2
Press Cursor ∞ (or 5) to select (highlight)
"7 DISPLAY OPTIONS," then press
ENTER.
Display Options menu appears. ("1 TV ASPECT" must
be selected – highlighted.)
3
Press Cursor ∞ (or 5) to select (highlight)
"4 SCREEN MESSAGE," then press
ENTER.
1 TV ASPECT
2 ANGLE MARK
3 STILL MODE
4 SCREEN MESSAGE
5 BLACK LEVEL
RETURN
1 ON
2 OFF
RETURN
4
Press Cursor ∞ (or 5) to select (highlight) a
desired setting, then press ENTER.
• 1 ON: Select this to show the on-screen indications on
the TV screen.
• 2 OFF: Select this not to show the on-screen
indications.
To erase the Setup menu, press RETURN repeatedly
until the Setup menu disappears.
DISPLAY OPTIONS
4:3 PS
ON
AUTO
ON
OFF
ENTER
SCREEN MESSAGES
ENTER

Setting the Brightness

Using this function, you can change the brightness of the on-
screen display.
To go back to the previous screen during the procedure,
press RETURN.
1
Press SETUP.
Setup menu appears on the TV screen.
2
Press Cursor ∞ (or 5) to select (highlight)
"7 DISPLAY OPTIONS," then press
ENTER.
Display Options menu appears. ("1 TV ASPECT" must
be selected – highlighted.)
3
Press Cursor ∞ (or 5) to select (highlight)
"5 BLACK LEVEL," then press ENTER.
1 TV ASPECT
2 ANGLE MARK
3 STILL MODE
4 SCREEN MESSAGE
5 BLACK LEVEL
RETURN
RETURN
4
Press Cursor ∞ (or 5) to select (highlight) a
desired setting, then press ENTER.
• 1 ON: Select this to darken the on-screen display.
• 2 OFF: Select this to brighten the on-screen display.
To erase the Setup menu, press RETURN repeatedly
until the Setup menu disappears.
– 35 –
DISPLAY OPTIONS
4:3 PS
ON
AUTO
ON
ON
ENTER
BLACK LEVEL
1 ON
2 OFF
ENTER