Programing The Playing Order Of The Tracks - JVC CA-MD9R Instructions Manual

Selecting a Track —————————————————————————
Using the unit
Rotate the MULTI JOG dial while playing or pausing.
MULTI JOG
Using the Remote Control
Press the 4 or ¢ button while playing or pausing.
Selecting a Passage within a Track (on the unit only) ——————————
Press and hold the
•
•
MD
Locating a Track with the Remote Control Directly ————————————
Using the number buttons on the Remote Control allows you to go directly to the beginning of any
track.
1.
2
1 3
DISC DISC DISC
2.
PTY DISPLAY
EON ON/OFF SEARCH MODE
1 2 3
TA/NEWS/
PTY SELECT
INFO
3.
4 5 6
7 8 9
10 +10

Programing the Playing Order of the Tracks

You can change the order in which the MDs and tracks play. (Program Play)
Using the unit
1.
PLAY MODE
• Rotate the MULTI JOG dial clockwise to select the next tracks.
• Rotate the MULTI JOG dial counterclockwise to select the previous tracks.
If you rotate the MULTI JOG dial over the last track of the selected MD, the unit jumps to the
first track of the next MD.
Each time you press the 4 or ¢ button, the track changes by one.
Press the ¢ button to go ahead one track at a time.
•
Press the 4 button to go back one track at a time.
•
Holding down the 4 or ¢ button allows you to change tracks continuously.
or
Hold the button to fast forward the track, and release the button when you reach the
passage you want to hear.
Hold the button to reverse the track, and release the button when you reach the passage
you want to hear.
Press the MD button.
The Remote Control is set to the MD operation mode.
Press the DISC button (1 to 3) for the MD containing the track you want to listen to.
Example: For the third MD, press DISC 3.
Enter the number of the track you want to listen to with the number buttons.
The selected track starts playing.
Example: For track 5, press 5. For track 15, press +10 then 5. For track 20, press +10, then
10. For track 32, press +10 three times, then 2.
You can program up to 32 steps in any desired order from among the loaded MDs.
You can only make or change a program when the MD Recorder is stopped.
Press the PLAY MODE button repeatedly on the MD Recorder until the PROGRAM indicator
lights up on the display.
"MD PROGRAM" also appears on the display.
If you have already made a program, the last step of the previous program is displayed
instead of "MD PROGRAM" unless you have erased the program.
CD
PROGRAM
MD
CD
Each time you press the PLAY MODE button, MD play mode changes as follows:
= MD PROGRAM = MD RANDOM = Off (Continuous Play) = (back to the beginning)
button while playing or pausing.
3
2
1
3
MD
2
1