Standard Recording - JVC CA-MD9R Instructions Manual

Standard Recording

You can record any sound source on the tape.
Using the unit only
1.
2.
3.
4.
REC PAUSE
5.
To pause, press the REC PAUSE button. Then press either the ¤ or ‹ button to restart recording.
To stop recording, press the 7 button.
To remove the tape, press down the 0 button after stopping the play.
You can also record the same source on the MD at the same time. (See page 34.)
Insert a blank or erasable tape into cassette holder.
Press the button if you want to record on both sides of the tape.
The indicator above the button lights up.
When using the auto reverse mode, press the ‹ button then the 7 button to start recording
in the forward (‹) direction.
Prepare the source, for example, by tuning in a radio station, loading CDs or MDs, or turning on
the external component.
Press the REC PAUSE button.
The indicator above the button lights up and the CA-MD9R enters recording pause mode.
Press the ‹ (or ¤) button to record the front side (or the reverse side).
When using the auto reverse mode to record both sides of a tape, press the ‹ button to
begin the recording from the front side.
If you are recording an AM (MW/LW) broadcast and you hear
interference, move the BEAT CUT switch on the back panel from
position 1 (the normal mode) to position 2.
1
BEAT
CUT
2