To Use A One Touch Button; Setting/Changing A Personal Speed Dial Code - Toshiba STRATA CIX User Manual

Table 13 Special Characters
Entry Meaning
Indicates "stop." The One Touch button blinks rapidly and stops the delivery of
*
Hold
+ the remaining digits in the string until it is pressed again. Multiple "stops" can be
programmed into one string.
Pause (1~9) seconds. If you need to pause longer than nine seconds, enter
*
additional pause escape sequences. For example, to insert a 17-second pause,
(1~9)
enter
without specifying the duration. In this example, you would see "PP."
** *
*
# #
Example of Special Character Usage
To create a One Touch for Park and Page under one button, program the following
sequence under the One Touch button.
CNF #33***HOLD FB1 #30
CNF – puts the caller on hold and gets new dial tone.
– code to park call
#33
**
– this special character outputs a single * which will select an available orbit
and display the selected orbit on the phone.
*
HOLD
user to view the selected orbit on the display. The dial string will restart from this
point when the One Touch button is pressed again.
– gets new dial tone on the PDN
FB1
#30 – code for All Call Page which allows the user to page the location of the
orbited call.

To Use a One Touch Button

Press the One Touch button.

Setting/Changing a Personal Speed Dial Code

See "Storing a System/Station Speed Dial Number" on page
Strata CIX and CTX IPT/DKT Telephone
*9*8
. The display of a pause in the Speed Dial Number shows a "P"
– This special character is a Stop. The dial string pauses and enables the
12/05
User Programming
One Touch Buttons
69.
109