JVC CA-FSB70 Instructions Manual page 65

4
Press UP or DOWN to select
the timer mode (the Daily Timer
or the Recording Timer) and the
source to play, then press
CLOCK/TIMER.
• Each time you press
the timer mode and the source to play
change as follows:
DAILY TIMER
CD
REC TIMER
TUNER
• "DAILY TIMER CD": plays the selected disc or your
program. (Daily Timer)
• Load a disc or make the program.
= go to step 5 .
• "DAILY TIMER TAPE": plays a tape. (Daily Timer)
• Make sure that the tape is in the cassette deck.
• Make sure that the tape direction is correct.
= go to step 6 .
• "DAILY TIMER TUNER": tunes in to the last station
you have been listening to. (Daily Timer)
= go to step 6 .
• "REC TIMER TUNER": records the last station you
have been listening to. (Recording Timer)
• Put a recordable cassette into the deck.
• Make sure that the tape direction and the Reverse
Mode are correct.
= go to step 6 .
5
When selecting "DAILY TIMER CD" in step
4 , select the disc number to play or Program
Play.
1) Press UP or DOWN to select the
disc number or Program Play.
• Each time you press the button, the
indication on the display changes as
follows:
CD DISC 1
CD PROGRAM
• "CD DISC 1" – "CD DISC 5": plays the selected
disc.
• "CD PROGRAM": plays the program you have
made.
2) Press CLOCK/TIMER.
The unit enters the volume level setting mode.
UP
DOWN
UP or DOWN,
CLOCK/
TIMER
DAILY TIMER
TAPE
DAILY TIMER
TUNER
UP
DOWN
CD DISC 2 CD DISC 3
CD DISC 5 CD DISC 4
CLOCK/
TIMER
6
Press UP or DOWN to set the
volume level, then press CLOCK/
TIMER.
• You can select the volume level between
"VOLUME – –" and "VOLUME 0" to
"VOLUME 40."
If you select "VOLUME – –," the volume
level is set to the current volume.
• To turn off the volume while the Recording
Timer is working, set the volume level to
"VOLUME 0."
The selected timer mode indicator (DAILY or REC) stops
flashing.
The unit enters the clock setting mode.
7
Adjust the clock if needed.
• See "Setting the Clock" on page 9.
8
Press STANDBY/ON
if the unit is on.
When the timer turns on the unit, the
the selected timer mode indicator (DAILY or REC) start
flashing.
To deactivate the timer temporarily, press and
hold CLOCK/TIMER until the
and the selected timer mode indicator (DAILY or
REC) go off.
To activate and change the timer, repeat steps 1 to 7 on
pages 25 and 26.
• Deactivate the timer first in the following cases:
– If you want to change the Daily Timer setting
– If you want to change the Recording Timer setting before
the Recording Timer works.
• To activate the timer again without changing the setting,
press CLOCK/TIMER repeatedly until the
indicator and the selected timer mode indicator (DAILY or
REC) light up on the display.
If the unit is already turned on when the timer-on time
comes
The timer does not works.
When you unplug the AC power cord or if a power
failure occurs
The timer will be canceled. You need to set the clock first, then set
the timer again.
When you have selected "CD PROGRAM" in step 5
Do not press DISPLAY while the unit is in standby mode to turn off
the clock indication ("DISPLAY OFF"); otherwise, the program
contents is cleared and playback starts in the Continuous Play mode
when the timer-on time comes.
Continued
UP
DOWN
CLOCK/
TIMER
to turn off the unit
(timer) indicator and
CLOCK/
TIMER
(timer) indicator
(timer)
26