Sanyo PDG-DXT10L Service Manual page 68

8-1-3 Cleaning the Filters
The projector uses three filters to keep the fans free of dust and other particles, and should be cleaned every
500 hours of operation. In dustier environments, it is recommended to clean the filters more frequently. If the
filter is dirty or clogged, your projector may overheat. When the message below is displayed the filters must
be cleaned.
Note:
When the Please clean filter message is displayed, please clean or replace all three filters at the
same time to synchronize the hours used display.
The Filter Message item should be enabled in the Options menu.
Refer to the following guide to clean the filters.
1.
Lift the projector to
expose the underside to
locate the first filter.
See the drawing on the
right.
Note: Only clean the
outside of the exhaust
vents with a vacuum
cleaner.
2.
The left-hand filter can be
accessed as shown.
Bottom view
- 68-
PDG-DXT10L