Calibrate Yuv - Sanyo PDG-DXT10L Service Manual

5-3Calibrate YUV

In Service Mode Select
Step1 Item and press "Select" key , and then you
will see the picture as follow。
Select "Calibration". In this menu input
pattern with 75﹪SMPTE pattern for
calibrate YUV Source and notice that the
Step2
input source must be
After input ready press "Select" key to
proceed, or if you won't do calibration just
press "Menu" key to leave。
ADC Calibration
480p format
。
- 46-
Input Pattern
PDG-DXT10L