Sanyo PDG-DXT10L Service Manual page 51

PDG-DXT10L
Select "Color Wheel Index" (The default value is
29. The range is 0~360.) In this menu input pattern
with "16 Gray Scale". Fine-tune until the gray
scale still distinct. Decrease the color to the
minimum. Then switch "256 Gray Scale", tune off
G, B channel, check the smooth in brighter level of
the R 256 ramp. If not, fine tune until R 256 ramp
smooth.
Step3
[Notice]
This Color Wheel Index value will be setting to
the projector's control board. If change
projector's control board, the Color Wheel
Index value must be re-adjusted by service
engineer.
- 51-